CNC Radial Forging Machine GFM SX-40
Manufacturer: GFM (Austria)
New in 1977 / 1997
Numbers of Hammers: 4
Forging force: 2.600 Ton (650t per hammer)
Strokes per minute: 270
Hammer length: 550 mm
Maximum diameter of forging for structural steel:
- circular cross section: Ø 400 mm
- square cross section: 330 mm
Maximum diameter of forging for alloy/tool steel:
- circular cross section: Ø 220 mm
- square cross section: 150 mm
- Maximum length of forging with/without lateral reception: Feed of manipulator A: 7.200 mm
Feed of manipulator B: 10.000 mm
Manipulators speed in fast moving: 350 mm/s
Feed speed of manipulators (steeples regulation): 10 ÷ 100 mm/s
Cooling water pressure: 3 ÷ 5 bar
Temperature of inlet water: max. 30˚C
Cooling water consumption: 100 m3/h
Pipe diameter for cooling water: 3”
Compressed air: min. 5 bar
Pipe diameter for compressed air: Consumption of compressed air: Ø20 mm
2 Nm3/h
Power supply (nominal power):
- low voltage site: 450 kW
- high voltage site: 600 kW
Machine dimension:
Axis height of forging above the hall level: 750 mm
Maximum height of machine above the hall level: 2.950 mm
Maximum length of machine at the hall level: 30.000 mm
Foundation length: 44.000 mm
Maximum width of machine at hall level without loading device: 8.020 mm
Foundation width: 18.600 mm
Machine weight: 445.520 kg